Nous vous informons que les inscriptions sont définitivement désactivées sur ce forum www.autohacking.net
* Pour toute nouvelle inscription, merci de vous inscrire sur le nouveau forum www.motorcarsoft.com
Cliquez ici pour vous inscrire à motorcarsoft.com https://www.motorcarsoft.com/viewtopic.php?f=77&t=296
We inform you that registrations are permanently disabled on this forum www.autohacking.net
* For any new registration, please register on the new forum www.motorcarsoft.com
Click here to register at motorcarsoft.com https://www.motorcarsoft.com/viewtopic.php?f=77&t=296
DiagBox 8 Installation & mise à jour
Comment télécharger? How to download?
Cliquez ici / Click here viewtopic.php?f=77&t=1294
- rgmaster3
- Capitaine Barberousse - Captain Redbeard
- Messages : 9222
- Enregistré le : ven. 29 sept. 2017 21:51
- Réputation : 925
- Localisation : Pirates Island
- A remercié : 561 fois
- A été remercié : 1297 fois
- Sexe :
- Zodiaque :
- Contact :
DiagBox 8 Installation & mise à jour
Download section, see bottom of this page
Installing DiagBox 8.01
This procedure and the software provided are intended for personal, educational and experimental use to install DiagBox 8.01. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.
Notice
- Links for DiagBox 8.01, DiagBox updates, Cache Restorer and "AWRoot_v7_Conf+Ativation_v8.exe" are in the attachment.
- Starting with an installed (32 bit) Windows XP Pro SP3 (or other 32 bit Windows) and ".NET 3.5 SP1" (I had FireFox and 7Zip also installed).
- Download and Install "MS VC++ 2008", a copy is available here "C:\teleassistance\visualC\vcredist_x86.exe" after installing DiagBox.
- DiagBox installs without issues on VMware Workstation and Player, but the below preperation is needed for DiagBox 7.62+ and V8.xx.
Preparation to install DiagBox 8.01 on VirtualBox
- Having installed 32 bit Windows + VirtualBox Guest Additions + .NET 3.51 and VC++ 2008, you can use the Powershell command "Get-WMIObject win32_BIOS" or the "DMIdecode" tool to obtain BIOS information.
- Start an administrator's CMD and navigate to "C:\Program Files\Oracle\VirtualBox\", and execute the following command (Replacing "Your VM" with your Virtual Machine's name, and System Serial with your hardware's, like "CDN29326BH", any other code may also work):
C:\Program Files\Oracle\VirtualBox>VBoxManage setextradata "Your VM" "VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial" "System serial"
Installing DiagBox 8.01
1- Install DiagBox 7.01 and run update 7.02 then install update v7.xx-7.57 (or any v7.45+ update that creates "C:\AWRoot\dtwr\cfg\Config.sys")
2- Restart the computer and rename "C:\AWRoot" to "C:\AWRoot7" (you may need to stop some diagBox processes)
3- Run DiagBox 8.01 installation until it requests Activation. Close it and run the tool "AWRoot_v7_Conf+Ativation_v8.exe" it will inject the necessary files and copy the configuration from "C:\AWRoot7".
4- Run DiagBox, it should continue the installation successfully.
Done !, Restart DiagBox 8.01 (as Administrator) to confirm all is well. If you face an issue, run the activation tool again and/or review "version.ini" as below.
Installing Updates
1- Download and install "DiagBox_updt_802.ISO" update.
2- Download and install subsequent updates or Maitresox updates.
Versions
The order of the version lines and which is active in VERSION.INI is important for the running of the system. DiagBox will display 08.01 if set as shown below. But Lexia will NOT work with "version.ini" set to V08.xx active (xx is the version number depending on which update is applied).
[APPLICATION]
version=08.01
version=07.65
If Lexia or PP2000 is started with "version=08.xx" active, "APPDIAG.SYS" will be corrupted and it will need to be restored before DiagBox will work again. To operate Lexia/PP2000 (after starting DiagBox with 8.xx), edit "version.ini" and comment/save "version=08.xx" (by inserting ";" as shown below) BEFORE starting LEXIA or PP2000.
Setting "version.ini" to 07.xx (by removing or commenting "version=8.xx" permanently) will prompt DiagBox to report V 07.xx, but everything will work fine. Also, 07.xxx can be used to indicate the real version of DiagBox, for example:
[APPLICATION]
version=07.817
Update
- DiagBox v7 and v8 install and run on all x86 Windows including Windows 10 TH1, TH2, RS1, RS2, RS3 and RS4.
- The "psaAagent.exe" issue on VirtualBox is now sorted by entering a System Serial for the Virtual Machine as described above.
- If you get "Error 2" after restarting DiagBox, ensure you only have "version=7.xx or 7.xxx" in "version.ini" before restarting DiagBox again.
Enjoy;
Comment télécharger? / How to download ?
viewtopic.php?f=77&t=1294
Recherche un programme par mots-clés / Search a program by keywords
search.php
Comment s'enregistrer sur le forum ?
How to register on the forum ?
viewtopic.php?f=77&t=296
Signaler un téléchargement ou une vidéo corrompu
Report a corrupted download or video
posting.php?mode=post&f=125
100 derniers membres ayant consulté ce sujet
abmorel, TORO, lyamine, picolo, pouravira, mormed86, ant101, BOFRANKY, apophys, kekegtr, rmarion, jesay, elauokazi, dybou, bmw44, japanstyle03, Borgo, shaque, mecano655, zikko31, maxime47, seb4588, swing, brucar, sioux, neutec, jeod5694, dimpiv972, bvgty, patMAN, modus34, XaRuS, lilio972, touriss974, ursule, SAID34, jeanjeandu59159, douljimal, Abdel, kawasaki22, rgmaster3, lotfi40, darkvad, wish250, condamor, sinistras, bricobob, fpinault, Gazgaz59, nova1967, minus, nono13010, reoco, mirai, mohadu95, rachidsytem34, bouny, NSES, djemai, Tex5432, tontotarik, kokotez, samirmou, amani21, Lirkha, Cricripopof, mediateur969, vf-1, hugy02, HOUSS, Jeremie06, adnanesama, brunoche, robalo, jojolabricole, crow74, chacal, tomtom2307, aarmand57250, DONMEGA, elmachino, quentinsant, grounge, ufm, flav, meeda276, miguel.seguranca, gat01, fifi31, jsh42152, tugamuc, gui95230, adilgone, lkfr, lofti2, darde, lolo11130, simoxfive, judoboy, zangoune